Used 170mm Diameter Curved Screen
Printing Machine Cylindrical Printing Equipment Please Note: The item is intact, with signs of opening and
use! The machine is mainly used for printing cylindrical type,
cone type products; Such as a variety of plastic, glass, metal materials made of
cylindrical, conical shape products, including wine bottles, medicine bottles,
cosmetics bottles and other packaging bottles; Mugs, thermos mugs, beer mugs,
red mugs, etc. Glass tube, pen ,ballpoint pen, fishing rod, bat and other small
cylindrical products; For cylindrical or conical type products, the printing
surface has a large concave or convex, the printing surface has spots and other
non-plane printing is not suitable for the machine. This curved screen printing machine is mainly used for the printing of
cylindrical and conical products with the diameter below 170
mm. The machine adopts front and
rear push-pull structure. Suitable for printing patterns with width less than 200mm; Length
less than 250 mm ; Suitable for all kinds of screen plate with the outer
diameter less than 280* 450mm and thickness less than
40mm. The machine is positioned by adjusting the height of the
rear main frame , the rear main beam according to the height of the substrate,
by adjusting the screen plate main frame and the rear connection screw loose (no
need to remove the screw), the overall movement to the strip air up and down to
the appropriate position. The upper and lower adjustment range is 160
mm. Substrate printing rack can move from left to
right ,front to rear, two fixed aluminum bar in the bottom can be directly
installed on both sides of the base, the aluminum bar base can move200 mm front
and rear; Both sides aluminum alloy strips are substrate placement rack
installation strip, the middle is substrate positioning rack installation
strip. Two mounting bars can be moved around as needed. Installation of aluminum bar movement: loosen the screws at
both ends of the installation bar and move them to the appropriate
position. Tighten the screws at both ends to complete the
positioning. On Aug 18, 2023 at 18:55:08 PDT, seller added the following information: