This auction is for a Equipment Solutions LFA-10 Linear Focus Actuator and Equipment Solutions CSA814 Linear Servo Controller.
The LFA-10 has the same specifications as the LFA-2010 actuator.
These units have a removable optics mount, and a base for the actuator.
I will email a copy of the LFA-10 data sheet, and SCA814 user manual.
These can be controlled via analog signals, or rs-232 control.
The non-contact optical feedback sensor allows for sub-micron resolution sensing.
Please ask if you have any questions.
Buyer to pay shipping.
Thanks for looking.
10 systems available. The LFA-2010 Linear Focus Actuator is
a high performance compact positioning actuator. It was specifically
developed for applications requiring both high precision and high-speed
positioning over a short to medium stroke. This product mates the voice
coil motor to a perfectly smooth flexure guidance system and a very high
resolution position feedback encoder. The LFA is well suited for
optical focusing and other micro-positioning applications in markets
such as semiconductor, medical, optical testing, scanning microscopy,
circuit board assembly and micro manufacturing. The LFA-2010 has a 20 mm
diameter clear aperture through its center, and 10mm of available
stroke. Different configurations of stroke length, force constant, optic
mounting, and other options are available as needed. The LFA20 come
stock with either a c-mount thread or a 12.7 mm diameter lens socket.
Other threaded holes also exist. Voice Coil Motor: The
motor used in the LFA is a custom designed moving coil motor optimized
using advanced computer modeling. The magnets used in Equipment
Solutions motors have some of the highest magnetic flux densities
available. The coil characteristics, including the resistance and
inductance, were closely designed to match the capabilities of the Servo Controlled Amplifier. The motor can drive the stage to unparalleled accelerations and peak velocities. Flexure Stage Guidance: The
LFA series uses flexures for guidance along the motion axis. Flexures
provide perfectly smooth motion. When designed and used properly they
can have infinite lifetime. The LFA flexure and motor configuration is
symmetric about a central axis where an optic is usually mounted. The
resultant optical axis is coaxial with the motion axis of the flexure
and the force vector of the motor, and this axis passes through the
center of mass of the moving system, thus producing no net torque. The
LFA flexure is stiff in all 5 cross-axes to the motion axis, except
there is a small parasitic rotation about the motion axis that is
proportional to the position on the motion axis. This parasitic motion
is inherent in flexure systems, but which axis is left to the choice of
the designer. ESI chose the parasitic axis to be a rotation about the
motion axis that doesn’t affect the intended application for most
customers. Most LFAs are used in optical applications where a rotation
of the optic about the optical axis is not an issue. Position Feedback: In
its standard configuration the LFA uses a non-contact optical analog
position encoder that makes it directly compatible with the . The
50 nanometer positioning repeatability described in the specifications
section assumes this sensor technology. The analog nature of the
position sensor promotes the exceptionally high positioning resolution
and bandwidth. For compatibility with digital servo systems the LFA-2010
can be optionally configured with a digital quadrature encoder. Specifications Clear aperture (option) 20 mm Range of Motion 10 mm Positioning Resolution 50nm (analog), 1mm (digital) Peak Force 30 lbs (for 10 sec.) Max Continuous Force 4.5 lbs (20 N) Motor Constant 0.6 lbs/Amp (2.7 N/Amp) Coil Resistance 1.5 ohms Coil Inductance 100 uH Travel Non-Straightness <1 um (Flexure) Flexure Parasitic Rotation 0.1 degrees per mm travel Dimension 75 X 75 X 75 mm Total Mass 1.7 kg Moving Mass 50 g cable length (stock) 28” (700 mm) The SCA-814 Linear Servo Controller was specifically designed to control single phase, non-comutated
devices like voice coil motors. It is a high performance single axis DC
motor controller and amplifier system. It is comprised of a highly
integrated single PC board level product with a cohesive interface and a
compact heat sink. This card provides current amplification and analog
servo control interfaces. The single-phase characteristic of the very
low noise current amplifier makes it particularly well suited for DC
motors such as galvanometers and voice coils. It was specifically
developed for control of motor applications requiring both high temporal
and spatial servo precision, such as machine vision, inspection,
scientific imaging, medical imaging and other business applications.
This amplifier interfaces directly to most of the Equipment Solutions
motor/stage solutions. A bipolar linear or switching regulated
power supply is required to operate the SCA814 amplifier. Typically
better performance can be achieved when using a linear power supply.
Equipment Solutions has several high-current supplies for this purpose
including the ±15V DC Switching Power Supply. Specifications Servo Control Law: Tunable PID, and Slew Rate Closed Loop Bandwidth: 100- 1000 Hz, 500 Hz Typical Command Input: RS232 SPI, +/- 2.5V DC Sensor Feedback: Analog P osition DAC: 16 Bit DAC Profile Generator: Arbitrary 64 point | Unlimited Linear Current output : Linear, 8A Safety Protection: Over Temp, Current, Position Input Voltage: +/-15V DC Standard Communication : RS232C Standard Operating Temperature: 0° C – 50°C Size: 3.0 X 3.0 X 1.0 in. | 76 X 76 25mm Weight: 6 oz. | 165g
Returns Accepted for this item if it's within 30 Days