You must have javascript enabled to use equipmentw.com !

Ariens factory Original 3003,1708,001708,0047347 drive disc plate-

LAWN and SNOW

USD $33.98

Condition : Open box

Free Shipping

{{variant_type_name}} :
eBay
SKU: N/A This site contains affiliate links for which we may be compensated Home & Garden / Yard, Garden & Outdoor Living / Outdoor Power Equipment / Snow Blowers

Notify me when the price drops

We will email you if we find a lower price on this product!

Target price (USD) $
THIS OFFER IS FOR A  NEW FACTORY ORIGINAL OEM  REPLACEMENT PART - THIS IS   NOT AN AFTERMARKET REPLACEMENT ITEM - after a short period of unavailability- new factory disc are back in stock This offer is for a new and unused original equipment OEM factory original Ariens part # 04743700 drive disc,  also known by the alternate part#  1708 , and the very old part # 3003 - this part is used as a snow blower / riding lawn mower friction drive disc and has also been known by the prior  #'s : 3003, 003003, 00300300, 1708, 01708, 00170800  . We have learned from experience that the original equipment disc - which has a different rubber durometer (hardness) rating, and a slightly higher domed center of the rubber ring - will likely outlast most of the aftermarket replacements. Yes, it may be a little more expensive, but then higher quality may cost a little more up front - but it usually pays off in the long run - no?  Besides - it's a real job (better said - a hassle) to install a drive disc in many of the older snow blowers, so why use parts that might not last as long or work as well? This drive disc will fit most older style Ariens snowblowers, such as a 10ML35, 10M4, 10M5, 10M6, 10M6D, 10M7D, 10ML60D, 10ML60,  910002, 910006, 910007, 910008, 910009, 910010, 910013, 910014,  910016, 910017, 910018, 910019, 910020, 910021, 910942, 910954, 910955, 910962, 910965, 910995, 10942, 10954, 10962, 10969, 10970 - As well as many of the larger frame current models snow blowers, and it also fits most Ariens rear engine rider mowers that have a rubber drive disc that makes them move. This disc is approx. 6" in diameter including the rubber material, approx 3/4" wide, the center hole is 3" across, and the spacing of the 5 mounting holes is 2 1/4'' from center to center. You're welcome to send us an email if you'd like confirmation that it fits your unit- make sure you provide us the model # off of the frame when you contact us.  If you have a compact frame snowblower unit that uses the smaller 4 1/2" dia. disc- this part will not work on your unit. NOTE :  the drive disc has the 1708 number stamped into the metal plate as shown,  and the metal plate appears to be shot-peened w/ media prior to zinc plating for enhanced bonding of the rubber during the curing process I would guess. They also are limiting the trimming of the rough edge of the rubber where it bonds to the back back plate - so the edges of the disc rubber may have a loose rubber "lip" of sorts on them.  I guess they're currently going for a better durability factor rather than the nicer appearance - everything has it's trade off I guess  - not sure of the real reason - but those guys know best - so we'll leave the engineering stuff up to them. We guarantee this is a new and unused original Ariens OEM part. This next paragraph is a copy of a email sent to one of our disc buyers that questioned "mounting" marks on the disc plate and marks he found on top of the rubber disc surface - it is useful but little known information - ***** I would like to comment on your observations :  Every Ariens disc is mounted , checked,  and trued if needed by the manufacturer (usually Dayco or Federal) prior to being shipped to Ariens. That is part of the Ariens quality control . The disc's are initially often out of round when they come out of the molds (I've seen them in production) and if not corrected they will have a shorter life and poorer performance . The rubber disc edge is also machined and flattened to increase the amount of rubber contact that the disc will have with the aluminum driven plate , for better performance.  It is also a fact that the rubber durometer is softer than some of the aftermarket disc because as the unit is used and the drive plate is subjected to heat/ cool cycles during use periods (so hot you wouldn't touch it)  - the rubber will harden from that alone - and if the disc rubber is too hard to begin with , it will be that much harder (worse) later - which will then cause the rubber to chunk out , which is the #1 form of disc failure.  So what initially gives the disc a "used" appearance is actually what will give the disc an extended life. I am posting this reply to the item listing , as this question occasionally pops up , and it is generally good information for buyers-  thanks chip In stock for immediate shipment!! This item will be sent flat fee via 1st class Priority US Mail to the lower 48 states as listed below . (or it can be sent with normal 1st class US Mail service for a slightly less cost) Can't find what your looking for?       Powered by The free listing tool. List your items fast and easy and manage your active items.

Returns Accepted for this item if it's within 30 Days

Ariens factory Original 3003,1708,001708,0047347 drive disc plate- LAWN and SNOW
See more
Price type
IN STOCK OUT STOCK